Email:
[email protected]
Phone: +86
15737108714
Honeycomb activated carbon is a new highly efficient adsorption and environmentally friendly activated carbon solution. Honeycomb activated carbon/charcoal is made from high-quality coal activated carbon as raw material and is made from honeycomb and activated at high temperatures. The honeycomb activated carbon blocks are cubes or cylindrical and are covered by a large number of through holes that effectively remove volatile substances and odors, effectively treat exhaust gases and purify air.
Xingsen Carbon Industry is a professional activated carbon manufacturer in China. In addition to traditional activated carbon products, we also offer special-purpose activated carbon such as honeycomb activated carbon, impregnated activated carbon and pickled activated carbon.
Which type of activated carbon is suitable for our system?
If you are unsure which activated carbon to choose, please contact us. We can provide you with free technical support and solutions.
If you want to test samples of activated carbon first, please take the opportunity to contact us for free samples.
After water-resistant treatment and secondary firing,
honeycomb activated carbon has high strength, water resistance,
strong acid and alkali resistance, and can be widely used in wastewater treatment,
organic solvent recovery adsorption, and various catalyst carriers.
It can be used directly or placed in a purification cabinet or adsorption bed.
If the exhaust gas concentration is high and the emission volume is large,
two purification cabinets and adsorption beds can be used in rotation. During use,
try to avoid excessive temperature, which will reduce the adsorption amount,
and the adsorption amount will decrease with rising temperature; at the same time,
avoid high dust content and oil mist, because tar dust mist will block the activated carbon micropores,
increase resistance, and reduce the adsorption effect. If the use environment contains a lot of dense dust and tar,
a pre-stage dust removal filter should be installed to achieve the best use effect and the longest service life.
| Items | Index |
| Common Dimension | 100*100*100,100*100*50,50*50*100, 50*50*50 mm |
| Pore Density | 100,150,200,300 holes/in2 |
| Common pore size | 1.5 mm, 3 mm, 5 mm, 8 mm, etc. |
| Wall thickness | 0.5-1.0 mm |
| Iodine value | 400-800 mg/g |
| Specific surface area | ≥1050 m2/g |
| Bulk density | 350-550kg/m3 |
| Mositure | ≤5% |
| CTC | ≥65% |
| Benzene adsorption rate (Dynamic state) | ≥25% |
| Benzene adsorption rate (Static state) | ≥35% |
| Wind speed (600 thickness 490 Pa resistance) | 0.8 m/s |
| Positive compressive strength | >0.8MPa |
| Lateral compressive strength | >0.3MPa |
| Operating temperature | ≤400℃ |
| Desorption Temperature | <120℃ |
| Endurance | >4 years (no pollution, no sealing) |
| Remarks: Other sizes or indicators can be customized according to customers’ requirements. | |
The invention of honeycomb activated carbon has brought the waste gas
industry to another new stage.
It is suitable for the treatment of large air volume and low concentration of
factory organic waste gas (triphenyl toxic and harmful gas).
It is suitable for indoor air purification and catering fume waste gas treatment.
Air conditioners, refrigerators, copiers, etc.
can remove odors. It can also be used as a catalyst carrier.
Honeycomb activated carbon has the characteristics of large specific surface area,
small through-hole resistance, developed micropores, high adsorption capacity,
and long service life. It is widely used in air pollution control.
The honeycomb activated carbon adsorption method is selected, that is,
the waste gas is in contact with porous activated carbon with a large surface.
Honeycomb activated carbon has been improved with special formulas and has multiple varieties.
It can also be customized for adsorption according to pollutants. The mixed raw materials are pressed by
customized molds and fired at high temperature. The honeycomb activated carbon produced has
the characteristics of large relative area, small through-hole resistance, developed micropores,
high adsorption capacity, and long service life. It is widely used in air pollution control.
The honeycomb activated carbon adsorption method is selected, that is,
the waste gas is in contact with the activated carbon over a larger area,
and the pollutants in the waste gas are adsorbed and decomposed, thereby playing a purification role.
| Items | Index |
| Common Dimension | 100*100*100,100*100*50,50*50*100, 50*50*50 mm |
| Pore Density | 100,150,200,300 holes/in2 |
| Common pore size | 1.5 mm, 3 mm, 5 mm, 8 mm, etc. |
| Wall thickness | 0.5-1.0 mm |
| Iodine value | 400-800 mg/g |
| Specific surface area | ≥1050 m2/g |
| Bulk density | 350-550kg/m3 |
| Mositure | ≤5% |
| CTC | ≥65% |
| Benzene adsorption rate (Dynamic state) | ≥25% |
| Benzene adsorption rate (Static state) | ≥35% |
| Wind speed (600 thickness 490 Pa resistance) | 0.8 m/s |
| Positive compressive strength | >0.8MPa |
| Lateral compressive strength | >0.3MPa |
| Operating temperature | ≤400℃ |
| Desorption Temperature | <120℃ |
| Endurance | >4 years (no pollution, no sealing) |
| Remarks: Other sizes or indicators can be customized according to customers’ requirements. | |
The special honeycomb activated carbon block is cube or cylindrical,
with a large number of through holes from one end to the other.
This structure has the characteristics of small pressure drop,
high mechanical strength, and large contact surface with gas.
Honeycomb charcoal blocks are mainly used for the removal of gas-phase pollutants.
Currently, it is widely used in air purification systems with
high flow and low concentration of VOC pollutant air flow.
Special activated carbon can remove undesirable or harmful gas components in the gas stream.
Molecules gather on a honeycomb-like, relatively large inner surface.
These honeycomb structures are also used to absorb odor molecules.
Honeycomb activated carbon is widely used in various waste gas purification equipment,
waste gas treatment projects and catalyst carriers, and is especially suitable for the purification
and treatment of high air volume and low concentration organic waste gas.
The pollutants that honeycomb activated carbon can remove include: benzene,
carbon tetrachloride, acetone, ethanol, ether, methanol, acetic acid, ethyl ester,
cinnamic acid, chlorine, phosgene, foul-odor gases, butane, methanol, styrene,
foul-odor gases and other acid gases, which can remove carbon monoxide,
carbon tetrachloride, benzene, formaldehyde, and alkaline gases.
Honeycomb activated carbon is a new adsorption material made of
high-quality powder activated carbon
(coal carbon or coconut shell charcoal) and binder.
The main production process is as follows:
1. Mix 70% toner and 30% adhesive evenly in the mixer.
2. The obtained flexible activated carbon sludge is molded with a vacuum kneader.
3. After mixing evenly, use 60-100 mesh screens in the molding machine to remove impurities.
4. Different shapes of molds can produce honeycomb activated carbon of different shapes.
The molded products become wet honeycomb activated carbon.
5. Cut the wet honeycomb into precise specifications and sizes through different cutting equipment.
6. After the cut honeycomb coal is dried, it becomes ordinary honeycomb activated carbon.
7. After 3 days of drying, enter a calciner and calcinate at a temperature of 800-900 degrees
for 8-9 hours to form water-resistant honeycomb charcoal.
Yes, we have our own factory. And we are a trusted manufacturer and supplier of high-performance activated carbon products with over 30 years of industry experience.
Normally the MOQ is 1 ton. If you need a smaller quantity, we suggest buying locally to save on cost.
Yes, we can send you free samples. Please let us know the product specifications and your delivery address, you can also email our sales team, we’ll arrange it soon.
Yes, we can offer third-party test reports, such as SGS report.
Of course. We receive many clients from various countries every month. You are very welcome to visit our factory and see the activated carbon production process.
We usually by sea or by land. We have our own professional shipping team to arrange booking and related services for you.
Yes, we export activated carbon worldwide. Our documents are complete, including MSDS, transport of goods, test reports, and special cargo certifications.
Usually 3 – 7 days and we have sufficient stock.
3802109000 3802101000
